[INTRO] [sound cue: system boot tone | low | steady] [sound cue: electric forklift idle hum | continuous] [spoken] Dockrat42 tutorial mode active. Operator perspective engaged. Stand in position. Hands to controls. Eyes forward. Training begins now. [SECTION 1: MOVE OUT] [spoken] Tap forward input now. [sound cue: electric motor roll forward] Maintain slow movement. Good. Turn steering wheel left. Half rotation. Hold path. Correcting lane entry. Return wheel center. [SECTION 2: BASIC CONTROL] [spoken] Right-hand joystick forward. Raise forks slowly. [sound cue: hydraulic lift hiss] Stop at knee height. Tilt mast back slightly. Hold load angle. Good control response. [SECTION 3: FIRST PERSON IMMERSION] [spoken] Approaching pallet zone. Reduce speed now. Tap reverse if overrun occurs. Look right. Clearance confirmed. Look left. Pedestrian lane inactive. Proceed forward three meters. [SECTION 4: PRECISION TEST] [spoken] Stop. Micro-adjust left. Half wheel input. Forward one tap. Raise forks two inches. Hold. Alignment acceptable. Dockrat42 confirms stable entry line. [SECTION 5: SAFETY RESPONSE] [spoken] Warning tone indicates close boundary object. Do not panic. Reduce movement input. Steer right quarter turn. Clearance restored. Resume operation. [SECTION 6: FLOW STATE] [spoken] You are now responding at expected trainee pace. Movement is smoother. Control timing is improving. Continue forward. Continue left. Lift. Hold. Reverse. Center. Good. [OUTRO] [spoken] Return forklift to neutral. Hands off controls. Remain standing. Training cycle complete. Dockrat42 tutorial mode remains available. [sound cue: electric hum fades slowly]
